Quick Tips to Finding Hidden Piping and Valves
Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.
There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.
If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. Having such a piping usually means that you have a high-pressure gas system for your home. Such gas systems usually have the shutoff valve near the water heater or the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.
If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. For such valves using a metal detector may come in handy since they are usually metallic in nature. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.